Easy key ® RS485-BUS read only Transponder

Technical Data:
Power: 12V DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +65°C
Read distance: appr..40 -100mm depends on the
transponder type
Mechanical dimensions: 103 * 103 x 15 mm
Interface: RS485-BUS up to 128 modules
Approvals: BZT, CE and TÜV
2 digital input and 2 digital output for external application.
Relay with 5A

Part Nr. A402-0090

EasyKey Hybrid Micromodul

Transponder read and write module is designed to be integrated in customers specified appliances.
It reads the transponder types H4002 and H 4102 and it can read and write the Chip V4050.
It has an integrated memory for about 1000 transponders.
Automatical switching function of the external relay in offline activity.
Digital inputs and outputs.

New!

Technical data:
Power: +5V DC +/- 10% ca. 120mA
Frequency: 125 kHz approx. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +55°C
Reading distance: approx..80 mm
Interface: RS 232 / 485-BUS 2-wired
Approvals: CE
Inputs: 2 digital inputs
Outputs: 2 TTL, 1 for relay
Dimensions printed circuit board 53 x 20 x 20 mm

Part Nr. A402-0060 Minimum order 100 pieces

 Easy key ® RS485-BUS read and write Transponder

with a real time clock and high memory

This easykey® Supports three different configurations: Memory capacity for 680, 1362 or 2728 Transponder codes. This memory can be divided in a part for emergency use and user logging.

This easykey® contains a battery buffered real time watch. The contents of the watch even the setup of the watch and the access code for the transponder cards can be manipulated by the computer over the RS485 bus.

The supervisor can activate a function which allow only a time or date limited acceptance of different transponder codes.

Digital outputs are a relays signal and a TTL buffered signal. Both can be used in a mono stable (each valid code activate the output signal for presetted time period) or bistable mode (each valid code inverts the output signal condition). All actions become recorded at the logging memory. The contents of this memory area can be transferred to the PC over RS485 bus.

This easykey® can not only read from the transponder information (even from V4050 transponder) he can also write information to a transponder with a write capability. Same as the easykey® mulitreader.

The integration of the electronic in boxes or cases is in preparation!

Part number A402-1016

RS232 / RS485-BUS Coverter

Convert from RS232 to RS485. 25 pin. connector to connect direct an easy key RS485-BUS modul to an PC-Com-port. LED - control of the data communication

Part Nr. A402-0091

Flush-type socket outlet plastic case for easy key RS485-BUS

Surface wall plastic case 118 x 118 x 30 mm
Color RAL 9003 white and gray

This plastic case has space enough for both, the easy key electronic and the antenna or for each separate.

Part Nr. A402-0093

 Surface-type socket-outlet plastic case for easy key RS485-BUS

Concealed wall plastic case 125 x 125 x 35 mm
Plastic case insert: 130 x 130 x 29 mm
Color RAL 9002 graywhite

This plastic case has space enough for both, the easy key electronic and the antenna or for each separate.

Part Nr. A402-0095

 Easy key UP RS485-BUS Transponder Read module with a RS485-BUS-Interface.

Technical Data:
Power: 12V DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +65°C
Read distance: up to 80mm depends on the
transponder type
Mechanical dimensions: 103 * 103 x 15 mm
Interface: RS485-BUS up to 128 modules
Approvals: BZT, CE and TÜV
2 digital input and 2 digital output with 10mA for external application.

Shipment includes: easy key UP RS485-BUS electronic plus antenna mounting holder and operating parts ( Antenna ).

This sytem can be installed into the complete Busch-Jeager product program alpha nea!

Part Nr. A402-0016

 Easy key /R Read modul for a read only Transponder

Technical Data:
Power: 12V DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +65°C
Read distance: from 10 to 100mm depends on
The transponder type
Mechanical dimensions: Circle 80mm x 6mm
Interface: RS232 TTL
Approvals: BZT, CE and TÜV
Data format: 9.600Baud, 8Bits, 1Stop bit,
NO Parity bit.
t

Part Nr. A402-0020

 Easy key Multireader Write - and Read module

Technical Data:
Power: 12V DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +65°C
Read distance: from 10 to 80mm depends on
The transponder type
Mechanical dimensions: Circle 80mm x 6mm
Interface: RS232 TTL
Approvals: BZT, CE and TÜV
Data format: 19.200 Baud, 8 Bits, 1 Stop bit,
NO Parity bit.

Support read only Transponder, read / write Transponder and the "Swatch and Junghans watch".

Part Nr. A402-0081

 Adapter cable for power support over the Keyboard

For Easy key Part nr. A402-0020 and A402-0081. Both connectors are supported DIN or PS/2 Cable lenght approx. 1,8 meters

Part Nr. 840-0119

 easy key LCD-BOX Write - and Read module

Technical Data:
Power: 12V DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Max. amount of key variations: 4.294.967.294
Operating temperature: -10°C to +65°C
Read distance: from 10 to 80mm depends on
The transponder type
Mechanical dimensions: Circle 80mm x 6mm
Interface: RS232 TTL
Approvals: BZT, CE and TÜV
Data format: 19.200 Baud, 8 Bits, 1 Stop bit,
NO Parity bit.
Display: LCD -Display 2 * 16 characters

Support read only Transponder, read / write Transponder and the "Swatch and Junghans watch".

Part Nr. A402-2020

 Easy key /S Stand alone modul

Technical Data:
Power: 9- 12V AV / DC +/- 10% ca. 35mA
Frequency: 125 kHz appr. 150 mW
Operating temperature: -10°C to +65°C
Read distance: from 10 to 80mm depends on
The transponder type
Mechanical dimensions: Circle 80mm x 25mm
Approvals: BZT, CE and TÜV
Memory size: 117 Transponder 26 Lock data
Relais: 5A
Relay mode: Mono-, automatic or dual mode
select able by Jumper.

The last 26 actions are stored at the easykey/S and can be read back by a read / write Transponder. This allowe to control the last 26 users of the easy key /S.
The programming will be done by a "Master card" or by a read / write Transponder and the easy key Manager Software.

Part Nr. A402-0031

Easy key Manager Software

Technical Data:
Support Win/95, Win/98, Win/NT based operating systems.
Management software for the easy key LCD-BOX and easy key /S data base for the configuration of access rights for the easy key /S modules.
This allowes a contact less data exchange of the easy key /S modules and the management of the lock book easy key /S.

Part Nr. A402-0094

 Transponder Card read only

Technical data:
Standard ISO- size 86 x 54 x 0,85 mm
40 Bit Unique Number - read only
Read distance ca. 60 - 100 mm

Part Nr. 860-0151

Read / write Transponder Card

Technical data:
Standard ISO- size 86 x 54 x 0,85 mm
a 32 Bit unique Number read only
Read distance ca. 60 - 100 mm
Type: V4050-64
1K Bit read / write memory with a password protection

Part Nr. 816-0720

Key transponder read only

Technical data:
Size oval 43 x 33 x 8 mm
40 Bit Unique number Read only
Read distance appr.. 40 - 60 mm

Part Nr. A402-0300

Transponder Glass tag read only

Technical data:
Glass transponder with a Ferrit kernel
Size: Diameter 3mm lenght 13mm
40 Bit Unique Number Read only
Read distance appr. 10 - 30 mm

Part Nr. 860-0178

Transponder Glass tag micro read only

Technical data:
Glass transponder with a Ferrit kernel
Size: Diameter 2,12mm lenght 11,2mm
40 Bit Unique Number Read only
Read distance appr. 10 - 20 mm

Part Nr. 860-0220

Transponder Tag read only

Technical data:
Plastic disk
Size: Diameter 30 mm, high 2 mm, hole 3,2mm in the center
40 Bit Unique Number Read only
Read distance appr. 40 - 60 mm

Part Nr. 860-0159

Transponder Tag to stick read only

Technische Daten:
Plastic disc to stick on one side
Size: Diameter 30 mm, high 2 mm, hole 3,2mm in the center
40 Bit Unique Number Read only
Read distance appr. 40 - 60 mm

Part Nr. 860-0164

 Transponder Tag 20mm read only

Technical data:
Plastic disk
Size: Diameter 20 mm, high 2 mm, hole 3,2mm in the center
40 Bit Unique Number Read only
Read distance appr. 40mm

Part Nr. 860-0224